流分类

1. 配置流分类

   在Switch上创建名称为c_fk,c_yg流分类，并分别配置匹配规则3000、3001。
   员工yg、访客fk

   [Switch] traffic classifier c_fk
   [Switch-classifier-c_fk] if-match acl 3000
   [Switch-classifier-c_fk] quit
   [Switch] traffic classifier c_yg
   [Switch-classifier-c_yg] if-match acl 3001
   [Switch-classifier-c_yg] quit

2. 配置流行为

   在Switch上创建流行为b1，并配置允许动作。

   [Switch] traffic behavior b1
   [Switch-behavior-b1] permit
   [Switch-behavior-b1] quit

3. 配置流策略，关联流分类和流行为。

   在Switch上创建流策略p_fk,P_FK，并分别将流分类c_yg,c_fk与流行为b1关联。

   [Switch] traffic policy p_fk
   [Switch-trafficpolicy-p_fk] classifier c_fk behavior b1
   [Switch-trafficpolicy-p_fk] quit
   [Switch] traffic policy p_yg
   [Switch-trafficpolicy-p_yg] classifier c_yg behavior b1
   [Switch-trafficpolicy-p_yg] quit

4. 应用流策略

   [Switch] vlan 10
      [Switch-vlan10] traffic-policy p_fk inbound
      [Switch-vlan10] quit
      [Switch] vlan 20
      [Switch-vlan20] traffic-policy p_yg inbound
      [Switch-vlan20] quit